UA-44035381-1
  • ClariSure<sup>®</sup> PA 5", 10", 20", 30"

ClariSure® PA 5", 10", 20", 30"

mdi ClariSure® PA cartridge filters are 100% polypropylene, very high retention efficiency pleated cartridge filters offering large filtration area.

These filters have heat stable construction and are used as pre-filters to sterilizing membrane cartridge filters.

Consistent and Reliable Quality:
ClariSure® cartridge filters are produced with ISO 9001-2008 certified quality management systems.
Regulatory Compliance:
Meet all pharmacopeial and compendia requirements and are registered with USFDA DMF #015554
Total Traceability
Unique identification number is laser etched on each other.
  • Pre-filtration of fermentor air
  • Pre-filtration of small volume parenterals
Construction
Pore size 0.2μm, 0.5μm, 1μm, 1.2μm, 2.5μm, 5μm, 8μm, 10μm
Filter Media Polypropylene
Support Layers Polypropylene
Body and Core Polypropylene
Size
Size
5" 10" 20" 30"
Effective Filtration Area (Nominal)
2500cm² 5000cm² 10000cm² 15000cm²
Operational
Max. Operating Temperature 80 °C @ < 30 psi (2 Kg/cm²)
Max. Differential Pressure 50 psi (3.5 Kg/cm²) @ 25 °C
Sterilization Autoclavable/In-line steam sterilizable at 121 °C for 30 minutes, 100 cycles
Assurance
Toxicity Passes Bioreactivity test, In Vivo, as per USP <88> for Class VI plastics
Non Fiber Releasing Passes test as per USP and comply with USFDA 21 CFR Part 210.3(b)(6) for fiber release
Indirect Food Additive All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520
Extractables with WFI Passes test as per USP
Good Manufacturing Practice These products are manufactured in a facility which adheres to Good Manufacturing Practices.
Oxidizable Substances Within limits as specified in USP
Particle Shedding Passes USP test for particulates in injectables
Quality Management System ISO-9001 Certified
USFDA DMF No. 015554
Type
ClariSure® PA
CPPA
Size
Length
Code
5"** 53
10" 54
20" 55
30" 56
Pore Size
Pore Size Code
0.2µm 01
0.5µm 04
0.65µm 09
1µm 05
1.2µm 10
2.5µm 06
5µm 07
8µm 17
10µm 08
20µm 11
30µm 19
40µm 20
Adapter
Code
7P A0
7P without fin A1
28 with fin C0
'O' D0
Elastomer
Code
Silicone SS
Viton SV
EPDM SE
FEP Encapsulated Viton FV*
Sterility
Code
Non Sterile 1
Pack Size
Pack Size Code
1 01
*FV is available in Adapter Code A0 (7P) and A1 (7P without fin) only
**Size 5" is available in Adapter Code A0 (7P) and A1 (7P without fin) only

Example :

CPPA 56 05 A0 SS 1 01
Example for Non Sterile: CPPA5605A0SS101

Datasheet Download
Certificate of Quality Download

Write a review

Note: HTML is not translated!
    Bad           Good