UA-44035381-1
  • Pre-sterilized PES Membrane Syringe Filters

Pre-sterilized PES Membrane Syringe Filters

mdi PES membrane type SYPL-S have Polyethersulfone (PES) membrane filter in a poly-propylene housing. These syringe filters are used for filtration and sterilization of protein solutions, culture media and serum. The low protein binding characteristics make these ideal for these applications, particularly where sample size is very small and recovery of protein of interest is sought.

  • Absolute Retention
  • Low protein binding
  • 16 Channels for minimum back pressure
  • High throughputs
  • Sterilization of high value additives such as hormones, vitamins and antibiotics.
  • Sterilization of protein solutions, culture media and buffers
Construction
Pore size 0.2µm, 0.45µm
Media Polyethersulfone (PES) Membrane
Diameter
4mm 13mm 25mm
Inlet Female luer-lock
Outlet Male luer slip
Housing Polypropylene
Operational
Max. Operating Temperature 55 °C
Max. Differential Pressure 75 psi @ 25° C
Burst Pressure >12kg/cm²
Hold-up Volume(with air purge)
<5µl <20µl <50µl
Sterilization By Gas EO
Sterilization By Irradiation Gamma
Effective Filtration Area
0.07 cm² 0.8 cm² 4.15 cm²
Bubble Point (0.2 µm) > 50 psi (> 3.52 Kg/cm²)
Bubble Point (0.45 µm) > 32 psi
Clean Water Flow Rate @ 20 psi (0.2µm)
> 0.8 ml/min > 12 ml/min > 80 ml/min
Clean Water Flow Rate @ 20 psi (0.45µm)
> 4 ml/min > 30 ml/min > 180 ml/min
Sample Volume
<1ml <10ml <100ml
Retention Efficiency (0.45µm) LRV >7 for Sr. marcescens (ATCC 14756) per cm² of filter area
Retention Efficiency (0.2µm) LRV >7 for Br. diminuta (ATCC 19146) per cm² of filter area
Assurance
Fiber Release Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing.
Particle Release The filtrate Complies with USP <788> test for particulate matter in injectables.
Indirect Food Additive The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520.
Extractables with WFI Passes test as per USP
Quality Management System ISO-9001 Certified
Type
Type Code
Presterilized polyethersulfone membrane syringe filter SYPL
Size
Diameter Code
4mm 01
13mm 03
25mm 06
Pore Size
Pore Size Code
0.2µm 01
0.45µm 02
Inlet/Outlet
Code
Female luer-lock M
Male luer slip N
XX
Sterility
Code
EO Sterile 2
Gamma Sterile 3
Pack Size
Pack Size Code
100 04

     Example :

SYPL 06 01 MN XX 2 04
Example for EO Sterile: SYPL0601MNXX204
Datasheet Download
Certificate of Quality Download

Write a review

Note: HTML is not translated!
    Bad           Good